Monthly Archives: May 2019

What SEER Rating Is Best For My House?

AC Installation of fan running on condenserNot long ago, air conditioners were known for their high energy consumption. The electricity bill of most households skyrocket during the summer months as a result of using AC to keep their homes cool. While there has been some improvements when you compare old air conditioners to the models available on the market today, many household are still not satisfied with what they have.

The best time to make the right decision about your energy consumption, as it relates to home cooling, is during AC installation. If the right AC system is not installed in your home, you will end up losing lots of money as you try to cool your home over the summer. This is why it is important to know the right SEER rating for your house.

SEER stands for Seasonal Energy Efficiency Ratio. It is an efficiency rating that takes into account the typical cooling output of an air conditioner and the total electric energy input. The cooling output is divided by the energy input to determine the efficiency ratio. Ideally, the higher the SEER rating of an air conditioner unit, the more efficient it will be.

Determining the Best SEER Rating For Your Home

Though it appears like a straightforward thing to do, determining the best SEER rating for your home can be a little complicated. This is because there are other factors you need to consider (like the cost of the unit). AC units with higher SEER rating cost more than the ones with lower rating, and in some instances, they may not be able to save you so much when other determining factors of efficiency come into play.

It is required that all new central air system installation should score at least a 13 on the SEER scale. A 13 SEER AC unit can keep your home at the same temperature as a higher rated unit like 16 SEER AC. Anything between 13 and 14 will be great for your AC installation.

In case you will like to know more about the Best SEER rating for your home, contact us today at Waychoff’s Air Conditioning. Our experts will be available to speak with you and provide suitable answers to your questions and concerns. An amazing experience awaits you.

How to Lower Your Utility Bill

If you’re like most homeowners, you’re looking for some ways to lower your utility bill wherever and however you can. There are a few tips and tricks that homeowners can do to ensure that your utility bill stays a reasonable cost as the seasons change. Your HVAC system can make or break the comfort level in your home, and the last thing you want is to have your utility bill increase for you to be content.

At-Home Tips

ways to lower your utility billsMaintenance Check – When the systems in your home are routinely monitored and maintained throughout the year, they are bound to stay in operation while visiting in pristine condition. Not only does this promote higher levels of productivity for your system, but it also prevents catastrophic damages that could result in more expenses and repairs down the line. Scheduling repairs in advance on a set schedule will keep the performance at an all-time high for an extended period.

Seal Checks – Air can seep through even the smallest of cracks, so checking to confirm that the seals along your windows and doors are secure is crucial. These discrepancies can go unnoticed for days, even months at a time possibly contributing to a higher electricity bill. Loss of cooling, especially in Florida, isn’t something you want to overlook within your home!

Insulation – Although we’re Florida natives and don’t experience harsh cold temperatures, we still experience a substantial amount of heat. If you have insulation already throughout, it may be time to consider extra protection. When those summer months roll around, and you’re cranking our air conditioning to keep us fresh, you can save energy and money with the right insulation installation.

Air Filter – As you go throughout your house and keep everything tidy, the key to minimizing the loss of air is consistently changing out the filter. This will help keep the HVAC working at its optimal level without any extra effort, unlike when there are dirt and dust buildup.

Manipulating the air conditioning units inside of your home will help professionals troubleshoot the issue once they know what’s already been done to remedy the problem. Simple practices that are easy to remember are going to be the key to keeping your air conditioning work at its optimal level without increasing your monthly utility bill.

Why Is My AC Running But Not Cooling?

dirty ac filter The Air conditioner is supposed to keep you comfortable during the summer heat by cooling your indoor air. It can be very frustrating when it is not performing this basic function. If you have an AC that is running but not cooling, the cause can be any of the following:

Clogged Air Filters

The air filter is one of the first places you should check if your AC is running but not cooling. A clogged air filter will restrict the flow of cool air to your room even when the machine is running.

Restrictive Air Filters

The Minimum Efficiency Reporting Value (MERV) rating of your air filter must match your HVAC system before it can perform optimally. If the problem of your AC running and not cooling started after you changed your air filter, it may be that the new filter is not ideal for your AC unit.

Air Duct Leaks

Also, when your ductwork is poorly sealed or not properly insulated, there will be loss of cool air as it is distributed in your home. Excessive air duct leak will make your home not to cool properly even when the AC is running.

Dirty Outside Unit

In addition, if your outside unit, commonly called the condenser, is dirty or crowded with debris, it will not dissipate heat properly. This can significantly impact the ability of your AC to cool your home even while it is running.

AC is Low on Refrigerant

What’s more, the refrigerant is vital in the air conditioning process. If the cooling unit doesn’t have enough, it will not be able to cool your home properly even when it is running. A refrigerant leak in the coil is usually the cause of the problem.

There you have it! Above are some of the reasons why your AC unit can be running but not cooling your home. If your AC is running without cooling, AC service or AC repair can always fix the problem. Get in touch with our AC experts at Waychoff’s Air Conditioning. We will fix the issue with your air conditioning unit, promptly and efficiently. We guarantee you quality and excellent AC repair and AC service.

How to Install a UV light on your AC

Ultraviolet (UV) light plays a vital role in improving indoor air quality. Ultraviolet provides a unique service to air conditioning as it is helpful to eliminate the bacteria and the possibility of mold spores before it can reach living areas. It can make a noticeable difference in the atmosphere of your home.

The Benefit to Installing Ultraviolet Light

Although air condition manufacturing companies are installing a light for air purification, you can also do it on your own. However, unless you have an experience you can get service done from professional, it will be good if call a technician to ensure successful and effective installation. Whichever way you choose, you can’t go wrong.

Type of UV Light

Way to Install a UV light

One set of lights is fixed over the air conditioner coil in the duct, and another set is attached in the return air duct before air handler. Air Probe Sanitizers are the most common lights that are available in various design and different sizes and can be placed in any air handling system. For the best solution, order the light according to the recommendation and specification are given by the maker.

Where light is to be installed, cut an opening more than the size of the base of the Ultraviolet mounting in the duct. The most important step is to mark the position and fix the mounting, slide in the casing for the light through the opening. Adjusting the screws by marking the position of the holes and for connection of wire for the casing on the duct by a template. Drill holes from outside pass joining lead out from the hole.

Set the casing inside and insert screws inside and fix with nuts from outside the duct fix the ultraviolet light into the housing. Close the opening in the duct with a sheet of tin and seal it with duct tape firmly. The last step is to connect and set the light which connects the air condition UV light to a standard electric outlet and set the thermostat setting on a position in place of the auto switch on the system to start the function of light. Call Waychoff’s Air Conditioning to help you install a new UV light.

Google Rating
Based on 1837 reviews